Features:  19” standard installation structure (patent).  Special designed frame could be connected by 8 pieces of screws. Cabinet is with very high intensity, maximum static loading capacity is up to 1300kgs.  Both front and rear doors are with two tight. High-density vented front door and double section rear door, with turning angle up to 180 degrees, ventilation rate is up to 70%.  Latest out looking design: double section side panels ternal hinges; embedded castors design.  Sliding and adjustable cable entries at top and bottom, edges of the cable entries are with the design to prevent cute wires.  Fan units are installed from outside of cabinets, easy to install and maintai  Internal cabinets reserve the dedicated channel alignment  Installation positions of mounting rails could be adjusted quickly Features of server cabinet: Material: SPCC cold rolled steel and Galvanized sheet Thickness: Mounting rails and castors pallets: 2.0mm; cabinet top crossbeam: 1.5mm; cable management panel: 1.0mm; others: 1.2mm Surface finishing: Mounting rails: zinc plated; others: powder coated Static loading capacity: 1300kgs Standards: Comply with ANSI/EIA RS-310-D, IEC60297-2, DIN41494, PART1, DIN41494, PART7, Compatible with 19” International Standards, ETSI Color: Black Ral9004, Gray Ral7035, Black Ral702119” standard installation structure (patent). Dimensions of server cabinet: Width: 600/800mm; Depth: 600/800/900/1000mm Capacity: 24/42UMaterial: SPCC cold rolled steel and Galvanized sheet